焊接专业关联词汇（铸造4）-资料-中国焊接资源网-中国焊接资源网

own
收縮shrink
收縮shrinkage
收縮，縮水contraction
收縮變形contraction distortion
收縮袷度contraction allowance
收縮氣孔巢(鑄疵)shrinkage porosity
收縮裕度shrinkage allowance
手柄，弔柄handle
手持面罩hand screen
手持面罩hand shield
手鎚hand hammer
手搗桿hand rammer
手電筒flash light
手動擠壓造模機hand squeezer
手動造模機hand molding machine
手風箱，皮老虎bellows
手風箱，皮老虎hand bellows
手工搗砂hand ramming
手工加料hand charge
手工造模hand molding
手工造模tucking
手刨hand planer
手鉗pincers
手抬澆桶bull ladle
手提柄澆桶hand shank
手提柄澆桶hand shank ladle
手提澆鬥bowl
手提澆桶hand ladle
手提磨輪機portable grinder
手推車hadnd carrier
手推平車hand truck
手壓擠manual squeeze
受熱面heating surface
受壓軟化(耐火磚)softening under load
書型模法booking
書型鑄模book mold
輸砂設備sand conveyor installation
輸送機conveyor syste
輸送量quantity delivered
輸送盛桶transfer ladle
輸送線conveyor line
熟黏土grog
熟黏土砂compo
數據控制，數值控制numerical control(NC)
豎澆道sprue
豎澆道棒sprue bar
豎澆道棒定位銷sprue button
豎澆道底sprue base
豎澆道底sprue bottom
豎澆道孔sptue hole
豎澆道塞sprue plug
豎澆道塞sprue plug valve
樹皮bark
樹枝狀結晶dendritic sgegregation
樹枝狀晶間偏析interdendritic segregation
樹枝狀晶間石墨interdendritic graphite
樹枝狀模型(包模鑄造)tree
樹枝狀組織dendritic structure
樹脂resin
樹脂調質resin modification
樹脂調質砂心油resin modified core oil
樹脂裏貼工場resin bonding plant
樹脂裏貼砂resin coated sand
樹脂黏結劑resin binder
樹脂黏結劑，塑膠黏結劑plastic binder
樹脂砂resin sand
樹脂砂心黏結劑pastic core binder
樹脂微粒resin paticle
刷子，毛筆brush
摔砂頭(摔砂造模機)ramming head
摔砂造模機sand slinger
摔砂造模機sand thrower
摔砂造模機slinger
閂鍵，閂塊(砂心)kicking block
栓塞plug
雙帶式輸送機twinbelt conveyor
雙端心型端承，雙端砂心頭，雙端砂心端承double core print
雙端窄匙double ender
雙股連續鑄造機twin-strand continuous casting machine
雙軌弔運車two-rail trolley
雙連風口twin tuyeres
雙梁式架空移動起重機two-girder overhead travelling crane
雙面模型板double sided pattern plate
雙面模型板，中板match plate
雙室爐double chamber furnace
雙膛爐double hearth furnace
雙圓抹鏝，雙端抹角弧片double ended radius sleeker
雙站式造模機two station molding machine
雙重熔化duplexing
雙重熔化法，雙煉法duplex process
雙重收縮double contraction
水玻璃，水位計water glass
水淬火water quenching
水淬粒渣water granulated slag
水分moisture
水分測定器moisture tester
水分試驗moisture test
水罐water pot
水冷water cooling
水冷風口，水冷風嘴water-cooled tuyere
水冷套water-cooled jacket
水煤氣water gas
水泥，膠結劑cement
水泥模cement bonded mold
水泥模砂cement sand
水泥模型cement pattern
水泥造模法cement molding
水平旋轉台horizontal rotating table
水平儀level
水韌法water toughening
水刷swab
水套式熔鐵爐water jacket cupola
水壓試驗water test
水銀(Hg)quick-silver
水銀柱mercury column
順磁性para-magnetism
順形心型，順型砂心撐contoured chaplet
順形壓擠板(造模機)contoured csqueeze plate
順序抽樣sequential samplin
順序控制sequential control
四元合金quaternary alloy
似塊狀石墨quasi-flake graphite
鬆弛試驗relaxation test
鬆件loose piece
鬆件模型loose pattern
鬆件模型loose piece pattern
鬆扣free
鬆木pine
鬆散aeration
鬆散度(鑄砂、鑄焦實驗用）shatter value
鬆砂aerate the sand
鬆砂cut sand
鬆砂機sand aerator
鬆砂機(砂處理)分離器(空氣污染控制用)disintegrator
鬆砂機，充氣器aerator，airator
鬆砂機，充氣器airator，aerator
鬆砂鬆砂sand cutter
鬆砂要sand cutting
鬆箱板具mold release trigger
鬆銷loose pin
鬆脂，鬆香rosin
送風式爐，鼓風式坩堝爐wind furnace
素來鐵(加拿大產特種生鐵)Sorel metal
速成展性鑄鐵quick malleable iron
粟木chest-nut
塑膠塗料plastic coating
塑性plasticity
塑性變形plastic deformation
酸醇樹脂alkyd resin
酸度acidity
酸度，pH，離標hydrogenexponent
酸洗cleaning with acid
酸洗pickling
酸性柏思麥法acid Bessemer process
酸性柏思麥鋼acid Bessemer steel
酸性柏思麥轉爐acid Bessemer converter
酸性襯acid lining
酸性電弧爐acid electric arc furance
酸性電爐鋼acid electric steel
酸性鋼acid steel
酸性火磚acid brick
酸性浸蝕acid etching
酸性耐火燒火燎材料acid refractory material
酸性平爐acid open-hearth
酸性平爐法acid open-hearth process
酸性玶爐鋼acid open-hearth steel
酸性熔渣acid slag
酸性生鐵acid pig iron
酸性試驗acid test
酸性氧化物acidic oxide
酸性渣法acid slag pracitice
酸性轉爐acid converter
隨意採樣random sample
碎焦炭breeze coke
碎焦炭coke breeze
碎料small scrap
碎裂shatter crack
碎砂機，鬆砂機sand breaker
碎鐵bushelling
碎心鎚core buster
碎心機core breaker
隧道爐tunnel furnace
隧道爐，隧道乾燥爐tunnel oven
隧道爐，隧道乾燥爐tunnel stove
隧道退火爐tunnel annealing furnace
隧道退火爐tunnel-type annealing furnace
隧道窯tunnel kiln
隧道鑄鐵圈tunnel casting ring
縮尺pattern maker's rule
縮管(鑄疵)shrinkage pipe
縮頸冒口feeder head with Washburn core
縮頸砂心breaker core
縮頸砂心break-off core
縮頸砂心wafer core
縮頸砂心Washburn core
縮頸砂心，敲落knock off
縮頸砂心，敲落neck down core
縮孔(鑄疵)shrinkage cavity
縮孔(鑄疵)shrinkage hole
縮孔[鑄疵]shrink hole
縮孔傾向shinkage cavity tendency
縮裂(鑄疵)contraction crack
縮裂(鑄疵)shrinkage crack
縮面百分率percentage of area reduction
縮面率reduction of area
縮入，滲透infiltration
縮水量pattern maker's shrinkage
縮陷處shrink mark
他型結晶allotriomorphic crystal
鉈(Tl)thaljium
塔式爐tower oven
台bench
台車，卡車truck
台車，托架，載體carrier
台車輪送機car conveyor
台車式爐car-bottom furnace
抬柄bull handle
抬動澆斗shank ladle
抬動澆桶carry ladle
抬動澆桶fork ladle
臺秤platform scale
臺上造模法bench molding
臺上鑄模bench mold
檯式磨床pedestal grinder
鈦(Ti)titanium
鈦鐵ferro-titanium
鈦氧包覆料rutile covering
鈦鑄鐵titanium cast iron
鉭(Ta)tantalum
探針，鉛鍾，測鍾，試體probe
碳carbon
碳櫬carbon lining
碳當量carbon equivalent
碳當量測定劑CE meter (carbon equivalent meter)
碳粉carbon powder
碳鋼carbon steel
碳鋼straight carbon steel
碳鋼，普通鋼plain carbon steel
碳弧熔接carbon arc welding
碳化carbonization
碳化鈣，電石calcium carbide
碳化鐵iron carbide
碳化物carbide
碳化物安定劑stabilizers
碳化物穩定劑carbide stabilizer
碳化矽silicon carbide
碳化矽壓塊silicon carbide briquests
碳化渣(白渣)carbide slag
碳精棒carbon rod
碳水化合物黏結劑carbohydrate binder
碳酸鈉(鹼性爐用熔鹼)purite
碳煙粉carbon black
碳質夾雜物carbonaceous inclusion
碳質砂carbon sand
碳磚carbon brick
湯姆斯鋼Thomas steel
搪瓷，瓷漆，琺瑯enamel
糖類黏結劑(糖蜜)sugar binder
糖蜜molasses
搯出式熔貯爐bale-out furnace，die casting
桃花心木mahogany
陶瓷基砂ceramic base sand
陶瓷濾心ceramic strainer core
陶瓷心型ceramic core
陶模鑄造法ceramic casting
陶模鑄造法ceramic mold
陶氏合金(鎂合金)Dow metal
鋾丙氏青銅Tobin bronze
套箍(活扣砂箱用)inside band
套管濾器thimble filter
套筒板手box spanner
套筒磚sleeve brick
套筒磚澆流道sleeve runner
套箱jacket
套箱slip jacket
套箱，砂框mold jacket
套箱式水冷熔鐵爐jacket type water-cooled cupola
特殊模砂special molding sand mixture
特種鋼special steel
特種黃銅special brass
特種蒙氣退火爐special atmosphere annealing furnace
特種青銅special bronze
特種鑄鐵special cast iron
鋱(Tb)(稀土元素)terbium
梯表試片step-bar test piece
梯表試片stepped test bar
銻(Sb)antimony
提砂鉤，夾鉗，升降桿lifter
提砂鉤，清除器cleaner
體心立方格子body-centered cubic lattice
天平，秤balance
天然模砂natural bonded molding sand
天然黏結砂naturally bonded sand
天然氣natural gas
天然砂natural sand
天然石墨電極natural electrode
天然石墨電極natural graphite
天然矽砂natural silica Sand
添加addition
添加劑addition agent
添加劑additive
添加新砂new sand addition
添澆after-pour
填充back-fill，back-up
填充back-up，back-fill
填縫劑joint mixture
填料packing material
填料熔接fusion of packing macherials
填入口，澆口filling port
填砂filling in
填砂，背砂filler sand
填砂框filling frame
填砂框(砂箱用)sand-feeder
填隙料，埋筋filler
條狀組織banded structure
貼附砂心super-imposed core
鐵(Fe)iron
鐵釘wire nail
鐵合金iron alloy
鐵焦比iron to coke ratio
鐵礦石iron ore
鐵耙，心骨突刺pricker
鐵水liquid iron
鐵水澆鑄床pig bed
鐵水靜壓力ferro-static pressure
鐵水泥iron cement
鐵碳平衡圖iron-carbon equilibrium diagram
鐵條bar iron
鐵液，鐵水melted iron
鐵珠shot iron
鐵珠，鐵水珠(鑄疵)iron shot
鐵鑄件iron castings
鐵磚iron brick
停吹blowing-out
停留時間stay[ing time]
停止鼓風turn off the blast
通風槽，槽構形(感應電爐)channel
通風機，通風器ventilator
通風系統ventilating system
通氣venting
通氣板vent board
通氣板vent plate
通氣度venting quality
通氣桿vent rod
通氣管vent p

本文引用地址：http://www.weldr.net/weld_notes/html/content_859.htm