y
介面條件boundary condition
介穩化metastabilization
介穩平衡metastable equilibrium
金(Au)gold
金剛砂carborundum
金相試驗metallographic test
金相顯微鏡metallographic microscope
金相顯微鏡metalloscope
金相顯微鏡metallurgical microscope
金相顯微設備metallographic equipment
金相學metallography
金屬metal
金屬穿透阻力(砂模)resistance to metal penetration
金屬間化合物intermetallic compound
金屬塊，起熔塊(低週波感應電爐)slug
金屬模metallic pattern chill mold
金屬模，壓鑄模，剛模die
金屬模生鐵chill cast pig iron
金屬模塗料，冷硬塗料chill coating
金屬模塗料油chill oil
金屬模型metal pattern
金屬模型metallic pattern
金屬模鑄錠chill cast ingot
金屬嵌入物metal insert
金屬砂箱metal flask
金屬滲透(鑄疵)metal penetration
金屬水泥metallic cement
金屬線，金屬絲wire
金屬心型(壓鑄)collapsible core，die cast
金屬鑄模metal mold
緊管釘，管心型撐pipe nail
近我角形砂sub-angular sand
浸濾，鹼質leach
浸入式熱電偶高溫計immersion pyrometer
浸入探傷法impregnating method
浸蝕，蝕刻etching
浸蝕劑，蝕刻劑etchant
浸塗dip coat
浸嘴(底澆式澆桶)immersion nozzle
進模口ingate
進模口，閘口inlet
進模口套(壓鑄模)die bush
晶格，結晶格子crystal lattice
晶格參數crystal lattice parameters
晶粒crystal grain
晶粒，粒砂，木紋grain
晶粒成長crystal grain-growth
晶粒粗化grain enlargement
晶粒大小size of grain
晶粒間腐蝕intercrystalline corrosion
晶粒間腐蝕intergranular corrosion
晶粒間裂痕intergranular crack
晶粒間破裂intercrystalline fracture
晶粒間破裂intergranular fracture
晶粒內破壞transcrystalline fracture(Crack)
晶粒生長grain growth
晶粒細化grain refinement
晶粒細化劑grain fefiner
晶粒組織grain structure
晶體crystal
晶體內破壞transgranular fracture
晶體石英粉crystal quartz flour
晶體石英砂crystal quartz sand
經過時間transit time
精檢scan
精煉refining
精煉廠refinery
精煉熔劑refining flux
精煉鐵refined iron
精密包模鑄造法precision investment casting
精密加工precision finishing
精密研光fine lapping
精密造模法precision molding
精密鑄造法precision casting
精軋輥finishing of roll
徑高比(冒口)diameter height ratio
淨化器，淨化劑purifiers
淨金屬[液]clean metal
淨砂(無粘結劑砂)sharp sand
淨鐵水naked molten iron
淨重net weight
靜電分離器electro-static separator
靜電積塵electro-static precipitation
靜電濾塵器dry electro-filter
靜負載static load
靜澆鑄，傾轉澆鑄quiescent pouring
靜力試驗static test
靜模鑄造static casting
靜止角angle of repose
鏡鐵specular iron
鏡鐵spiegel [iron]
鏡鐵spiegel eisen(6 to 30% Mn)
鏡鐵礦iron glance
鏡子miiror
鳩尾(標)，鳩尾榫頭dove-tail
鳩尾槽dove-tail groove
酒精水平儀alcohol level
舊砂black sand
舊砂old sand
舊砂處理sand reconditioning
舊砂複用repeated transverse impact test
局部淬火differential quenching
局部淬火selective quenching
局部非氧化針孔(鑄疵)localized unoxidized pinholes
局部加熱differential heating
局部加熱local heating
局部滲碳local carburizing
局部退火local annealing
局部退火selective annealing
局部氧化針孔localized oxidized pinholes
局部硬化differential hardening
局部硬化local hardening
局部硬化selective hardening
局部作用local action
菊花狀石墨graphite rosette
菊花狀石墨rosette graphite
具登曲線(爐內最高溫度線)Belden curve
聚苯乙烯poly styrene
聚合polymerization
聚合物polymer
聚結agglomeration
聚渣slag accretion
鋸saw
鋸齒形集渣流道saw tooth dirt trap
鋸工間sawing room
鋸口，截口kerf
鋸屑saw dust
絹篩sik sieve
絕對濕度absolute humidity
絕對溫度absolute temperature
絕熱材料heat insulation composition
絕熱火磚heat insulating fire brick
絕熱冒口套筒heat insulating sleeve
絕緣材料insulating materials
絕緣冒口套insulating sleeve
絕緣耐火材料insulating refractories
絕緣體蓋_鑄件insulator flap castings
絕緣磚insulating brick
均佈非氧化針孔(鑄疵)uniform unoxidized pinholes
均佈氧化針孔(鑄疵)uniform oxidized pinholes
均衡鼓風熔鐵爐balanced blast cupola
均冷圈condensing rings
均品質consistent quality
均熱爐soaking pit
均熱時間soaking time
均質化homogenizing
均質化退火homogenizing anneal
均質組織homogeneous structure
菌形砂心頭mushroom coreprint
菌狀冒口cauliflower head

本文引用地址：http://www.weldr.net/weld_notes/html/content_857.htm

相关专题：焊接专业关联词汇（机械类）

来源：中国焊接资源网(http://www.weldr.net/)
作者：jql
原文：焊接专业关联词汇（铸造2）(http://www.weldr.net/weld_notes/html/content_857.htm)

[1] [2] [3] [4]

责任编辑：jql